Dual backlit display with both mA measurement and percent of 4 to 20 mA span.Measurement Spotlight illuminates hard to see wires in dark enclosures.Detachable clamp with extension cable for measurements in tight locations.Measure 10 to 50 mA signals in older control systems using the 99.9 mA range.Automatically change the 4 to 20 mA output for remote testing.Power saving features, auto-off, backlight timeout extend battery life.Hold function captures and displays changing measurements.Measure 4 to 20 mA signals with in-circuit measurement.Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters.Source 4 to 20 mA signals for testing control system I/O or I/Ps.mA output linear ramp or 25% step output.
DC voltage measurement to verify 24V power supplies or voltage I/O signals.Automatically change the voltage output for remote testing.Voltage output linear ramp or 25% step output.Apply a mA input signal to a device and measure its’ 4-20 mA output on devices such as valves or mA isolators.mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal.Output mA signal enables a logging DMM or other device to record the 4- to 20 mA signal without breaking the loop.Enables milliamp signal logging to a separate logging device without breaking the loop.Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp.Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals.
Temperature is often the first indication of potential problems in electrical and mechanical applications. But how can you easily determine if an electrical panel has a hot spot, a motor is overheating or an HVAC system is inefficient? The answer is with an infrared (IR) thermometer. With handheld, non-contact IR thermometers, you can instantly measure equipment temperatures in hard-to-reach or hazardous areas.
0 kommentar(er)
